Central Springs

COMPRESSION SPRINGS

These springs also can be supplied in all shapes and sizes and made from round, square or flat material (flat material can be coiled on edge or flat side)

We are in a position to supply springs of special shapes and sizes to specified strengths to suit special conditions or requirements. In ordering springs please give all the information possible regarding sizes and conditions under which springs are to work. If possible, send a sample and state how the spring is to be used, i.e.- mention how far it is to compress when in use and how rapidly it works. If a sample cannot be furnished, then send a sketch giving the information as shown below:

Diameter

Give the inside, outside or mean diameter. Be sure to mention if spring works in a hole, tube, cylinder or socket and give size of this also. If spring works over rod or shaft, mention this fact and give size of rod or shaft. If spring works in a hole and over a rod, then be certain to specify both dimensions so that the spring can be made to work correctly.

Length

Give length of spring when free or unloaded. If spring is fitted under compression, please give fitted length and load.

Size and Shape of Material

Specify if spring is to be made of round, square or rectangular section material and give size of material in fractional or decimal parts of an inch/ millimetre. If the spring has to give a certain load at a certain compression and for this reason the size of the material is unknown, we would refer you to the technical data section, where you will see the method of obtaining this information. In every case we strongly advise you to furnish us with full details (loads, etc.) so that we may check the specification of the spring to ensure the design is absolutely suitable for its purpose.

Material

State if steel, brass or phosphor bronze, springs can be made from the regular carbon steels and from chrome vanadium, silico-maganese and other alloy steels.

Style of Ends

Specify if springs are to have (1) Plain ends, not ground; (2) Plain ends, ground; (3) Squared and closed ends, not ground; (4) Squared and Closed ends, ground. When the style of the ends is not specified we supply springs with squared and closed ends, ground. Special ends can also be supplied. Please send sketch showing requirements.

Wire Diameter	Outside Diameter	Free Length	Apx. No of	Max Rec Deflection	Music Wire			Stainless Steel
d mm	OD mm	LO mm	wkg coils	LD mm	Max Rec Load N	Rate N/mm	Product Code	Max Rec Load N	Rate N/mm	Product Code
0.20	1.20	2.0	3.5	0.6	2.56	4.91	C30001	2.13	4.09	C40001
		2.7	5.5	0.8		3.12	C30002		2.60	C40002
		3.9	8.5	1.3		2.03	C30003		1.69	C40003
		5.5	12.5	1.9		1.38	C30004		1.15	C40004
		7.8	18.5	2.8		0.92	C30005		0.77	C40005
	1.4	2.3	3.5	0.8	2.26	2.83	C30006	1.88	2.36	C40006
		3.2	5.5	1.3		1.81	C30007		1.51	C40007
		4.6	8.5	1.9		1.16	C30008		0.97	C40008
		6.5	12.5	2.8		0.80	C30009		0.67	C40009
		9.3	18.5	4.2		0.54	C30010		0.45	C40010
	1.8	3.0	3.5	1.5	1.79	1.20	C30011	1.49	1.00	C40011
		4.4	5.5	2.4		0.77	C30012		0.64	C40012
		6.4	8.5	3.6		0.49	C30013		0.41	C40013
		9.2	12.5	5.4		0.34	C30014		0.28	C40014
		13.3	18.5	8.0		0.23	C30015		0.19	C40015
	2.2	4.0	3.5	2.5	1.48	0.61	C30016	1.23	0.51	C40016
		5.9	5.5	3.8		0.38	C30017		0.32	C40017
		8.7	8.5	5.8		0.25	C30018		0.21	C40018
		12.6	12.5	8.6		0.18	C30019		0.15	C40019
		18.3	18.5	12.7		0.12	C30020		0.10	C40020
	2.7	5.4	3.5	3.8	1.19	0.31	C30021	0.99	0.26	C40021
		8.2	5.5	6.0		0.2.	C30022		0.17	C40022
		12.4	8.5	9.3		0.13	C30023		0.11	C40023
		17.9	12.5	13.8		0.08	C30024		0.07	C40024
		26.2	18.5	20.3		0.06	C30025		0.05	C40025

Wire Diameter	Outside Diameter	Free Length	Apx. No of	Max Rec Deflection	Music Wire			Stainless Steel
d mm	OD mm	LO mm	wkg coils	LD mm	Max Rec Load N	Rate N/mm	Product Code	Max Rec Load N	Rate N/mm	Product Code
0.25	1.45	2.4	3.5	0.6	4.10	6.95	C30026	3.41	5.79	C40026
		3.3	5.5	0.9		2.42	C30027		3.68	C40027
		4.7	8.5	1.4		2.86	C30028		2.;38	C40028
		6.6	12.5	2.1		1.94	C30029		1.62	C40029
		9.4	18.5	2.9		1.32	C30030		1.10	C40030
	1.85	3.0	3.5	1.2	3.36	2.93	C30031	2.80	2.44	C40031
		4.3	5.5	1.9		1.86	C30032		1.55	C40032
		6.2	8.5	2.8		1.20	C30033		1.00	C40033
		8.7	12.5	4.1		0.83	C30034		0.69	C40034
		12.5	18.5	6.0		0.55	C30035		0.46	C40035
	2.25	3.7	3.5	1.8	2.80	1.50	C30036	2.33	1.25	C40036
		5.5	5.5	3.0		0.95	C30037		0.79	C40037
		8.0	8.5	4.5		0.61	C30038		0.51	C40038
		11.4	12.5	6.7		0.42	C30039		0.35	C40039
		16.4	18.5	9.7		0.29	C30040		0.24	C40040
	2.75	4.9	3.5	3.0	2.30	0.77	C30041	1.91	0.64	C40041
		7.3	5.5	7.7		0.49	C30042		0.41	C40042
		10.9	8.5	7.3		0.31	C30043		0.26	C40043
		15.7	12.5	10.7		0.22	C30044		0.18	C40044
		22.9	18.5	15.9		0.14	C30045		0.12	C40045
	3.45	7.1	3.5	5.1	1.83	0.36	C30046	1.52	0.30	C40046
		10.7	5.5	7.9		0.24	C30047		0.20	C40047
		16.1	8.5	12.3		0.16	C30048		0.13	C40048
		23.3	12.5	18.0		0.11	C30049		0.09	C40049
		34.1	18.5	26.6		0.07	C30050		0.06	C40050

Wire Diameter	Outside Diameter	Free Length	Apx. No of	Max Rec Deflection	Music Wire			Stainless Steel
d mm	OD mm	LO mm	wkg coils	LD mm	Max Rec Load N	Rate N/mm	Product Code	Max Rec Load N	Rate N/mm	Product Code
0.32	1.92	3.1	3.5	0.8	6.56	7.86	C30051	5.46	6.55	C40051
		4.4	5.5	1.3		5.00	C30052		4.17	C40052
		6.3	8.5	2.1		3.24	C30053		2.70	C40053
		8.7	12.5	2.9		2.20	C30054		1.83	C40054
		12.5	18.5	4.4		1.49	C30055		1.24	C40055
	2.32	3.7	3.5	1.4	5.62	4.02	C30056	4.67	3.35	C40056
		5.3	5.5	2.2		2.57	C30057		2.14	C40057
		7.7	8.5	3.4		1.66	C30058		1.38	C40058
		10.9	12.5	5.0		1.13	C30059		0.94	C40059
		15.6	18.5	7.4		0.77	C30060		0.64	C40060
	2.82	4.7	3.5	2.3	4.68	2.06	C30061	3.90	1.72	C40061
		6.8	5.5	3.6		1.31	C30062		1.09	C40062
		10.0	8.5	5.6		0.85	C30063		0.71	C40063
		14.2	12.5	8.1		0.58	C30064		0.48	C40064
		15.6	18.5	12.1		0.38	C30065		0.32	C40065
	3.52	6.3	3.5	3.8	3.78	0.97	C30066	3.15	0.81	C40066
		9.4	5.5	6.1		0.62	C30067		0.52	C40067
		14.0	8.5	9.4		0.40	C30068		0.33	C40068
		20.1	12.5	13.8		0.28	C30069		0.23	C40069
		29.3	18.5	20.4		0.19	C30070		0.16	C40070
	4.32	8.7	3.5	6.1	3.07	0.50	C30071	2.56	0.42	C40071
		13.1	5.5	9.6		0.31	C30072		0.26	C40072
		19.8	8.5	14.9		0.22	C30073		0.18	C40073
		28.6	12.5	21.9		0.14	C30074		0.12	C40074
		41.9	18.5	32.4		0.10	C30075		0.08	C40075

Wire Diameter	Outside Diameter	Free Length	Apx. No of	Max Rec Deflection	Music Wire			Stainless Steel
d mm	OD mm	LO mm	wkg coils	LD mm	Max Rec Load N	Rate N/mm	Product Code	Max Rec Load N	Rate N/mm	Product Code
0.4	2.4	3.5	3.5	0.8	7.44	0.8	C30076	6.20	7.75	C40076
		5.0	5.5	1.3		1.3	C30077		4.90	C40077
		7.0	8.5	1.9		1.9	C30078		3.19	C40078
		10.0	12.5	3.0		3.0	C30079		2.17	C40079
		14.0	18.5	4.1		4.1	C30080		1.46	C40080
	2.9	4.3	3.5	1.5	7.15	1.5	C30081	5.94	3.97	C40081
		6.3	5.5	2.4		2.4	C30082		2.53	C40082
		9.1	8.5	3.7		3.7	C30083		1.63	C40083
		13.0	12.5	5.5		5.5	C30084		1.11	C40084
		18.5	18.5	7.9		7.9	C30085		0.75	C40085
	3.6	5.6	3.5	2.8	6.36	2.8	C30086	5.30	1.90	C40086
		8.3	5.5	4.4		4.4	C30087		1.21	C40087
		12.0	8.5	6.6		6.6	C30088		0.78	C40088
		17.5	12.5	10.0		10.0	C30089		0.53	C40089
		25.5	18.5	14.9		14.9	C30090		0.36	C40090
	4.4	7.5	3.5	4.5	5.24	4.5	C30091	4.36	0.97	C40091
		11.0	5.5	6.9		6.9	C30092		0.61	C40092
		16.5	8.5	10.7		10.7	C30093		0.40	C40093
		24.0	12.5	16.0		16.0	C30094		0.27	C40094
		35.5	18.5	24.1		0.22	C30095		0.18	C40095
	5.4	10.5	3.5	7.3	4.35	7.3	C30096	3.63	0.50	C40096
		16.0	5.5	11.5		11.5	C30097		0.32	C40097
		24.0	8.5	17.6		17.6	C30098		0.20	C40098
		35.0	12.5	26.0		26.0	C30099		0.14	C40099
		53.0	18.5	40.2		40.2	C30100		0.09	C40100

Wire Diameter	Outside Diameter	Free Length	Apx. No of	Max Rec Deflection	Music Wire			Stainless Steel
d mm	OD mm	LO mm	wkg coils	LD mm	Max Rec Load N	Rate N/mm	Product Code	Max Rec Load N	Rate N/mm	Product Code
0.5	3.0	4.4	3.5	0.9	10.38	11.58	C30101	8.65	9.64	C40101
		6.1	5.5	1.4		7.42	C30102		6.18	C40102
		8.7	8.5	2.2		4.80	C30103		3.99	C40103
		12.0	12.5	3.0		3.27	C30104		2.72	C40104
		17.5	18.5	4.7		2.21	C301005		1.84	C401005
	3.7	5.5	3.5	1.8	9.99	5.57	C30106	8.32	4.64	C40106
		7.9	5.5	2.8		3.53	C30107		2.94	C40107
		11.5	8.5	4.4		2.28	C30108		1.90	C40108
		16.0	12.5	6.2		1.56	C30109		1.30	C40109
		23.5	18.5	9.5		1.05	C30110		0.87	C40110
	4.5	7.0	3.5	3.3	9.31	2.83	C30111	7.75	2.36	C40111
		10.0	5.5	4.9		1.81	C30112		1.51	C40112
		15.0	8.5	7.9		1.17	C30113		0.97	C40113
		21.5	12.5	11.7		0.79	C30114		0.66	C40114
		31.0	18.5	17.0		0.54	C30115		0.45	C40115
	5.5	9.4	3.5	5.5	8.03	1.46	C30116	6.69	1.22	C40116
		14.0	5.5	8.6		0.93	C30117		0.78	C40117
		20.5	8.5	12.9		0.61	C30118		0.51	C40118
		30.0	12.5	19.4		0.41	C30119		0.34	C40119
		44.5	18.5	29.4		0.27	C30120		0.23	C40120
	6.8	13.5	3.5	9.2	6.56	0.73	C30121	5.46	0.60	C40121
		20.0	5.5	14.0		0.46	C30122		0.38	C40122
		30.0	8.5	21.3		0.30	C30123		0.25	C40123
		44.0	12.5	31.8		0.21	C30124		0.17	C40124
		65.0	18.5	47.6		0.14	C30125		0.11	C40125

Wire Diameter	Outside Diameter	Free Length	Apx. No of	Max Rec Deflection	Music Wire			Stainless Steel
d mm	OD mm	LO mm	wkg coils	LD mm	Max Rec Load N	Rate N/mm	Product Code	Max Rec Load N	Rate N/mm	Product Code
0.63	3.83	5.5	3.5	1.5	20.97	14.02	C30126	17.47	11.68	C40126
		7.8	5.5	2.4		8.90	C30127		7.42	C40127
		11.0	8.5	3.5		5.77	C30128		4.80	C40128
		15.5	12.5	5.2		3.93	C30129		3.28	C40129
		22.5	18.5	7.8		2.65	C30130		2.21	C40130
	4.63	6.7	3.5	2.4	17.15	7.16	C30131	14.28	5.96	C40131
		9.6	5.5	3.8		4.55	C30132		3.79	C40132
		14.0	8.5	5.8		2.94	C30133		2.45	C40133
		20.0	12.5	8.7		2.00	C30134		1.67	C40134
		29.0	18.5	12.8		1.35	C30135		1.13	C40135
	5.63	8.5	3.5	4.2	15.48	3.69	C30136	12.90	3.07	C40136
		12.5	5.5	6.7		2.35	C30137		1.96	C40137
		18.5	8.5	10.3		1.55	C30138		1.27	C40138
		26.0	12.5	14.7		1.03	C30139		0.86	C40139
		38.5	18.5	22.3		0.70	C30140		0.58	C30140
	6.93	11.5	3.5	6.9	12.44	1.83	C30141	10.36	1.53	C30141
		17.0	5.5	10.8		1.17	C30142		0.97	C30142
		25.5	8.5	16.6		0.76	C30143		0.63	C30143
		36.5	12.5	24.2		0.51	C30144		0.42	C30144
		54.0	18.5	36.3		0.34	C30145		0.29	C30145
	8.63	16.0	3.5	10.9	9.99	0.89	C30146	8.32	0.74	C30146
		24.5	5.5	17.4		0.57	C30147		0.47	C30147
		37.0	8.5	26.8		0.37	C30148		0.31	C30148
		55.0	12.5	40.7		0.25	C30149		0.20	C30149
		80.5	18.5	59.9		0.17	C30150		0.14	C30150

Wire Diameter	Outside Diameter	Free Length	Apx. No of	Max Rec Deflection	Music Wire			Stainless Steel
d mm	OD mm	LO mm	wkg coils	LD mm	Max Rec Load N	Rate N/mm	Product Code	Max Rec Load N	Rate N/mm	Product Code
0.8	4.8	6.9	3.5	18.53	31.86	18.53	C30151	26.53	15.44	C30151
		9.7	5.5	11.57		11.57	C30152		9.88	C30152
		14.0	8.5	7.67		7.67	C30153		6.39	C30153
		19.5	12.5	5.22		5.22	C30154		4.35	C30154
		28.0	18.5	3.52		3.52	C30155		2.93	C30155
	5.8	8.3	3.5	9.53	25.97	9.53	C30156	21.64	7.94	C30156
		12.0	5.5	6.07		6.07	C30157		5.06	C30157
		17.5	8.5	3.92		3.92	C30158		3.27	C30158
		24.5	12.5	6.67		2.67	C30159		2.22	C30159
		36.0	18.5	1.80		1.80	C30160		1.50	C30160
	7.1	10.5	3.5	4.77	24.02	4.77	C30161	20.00	3.97	C30161
		15.5	5.5	3.03		3.03	C30162		2.52	C30162
		23.0	8.5	1.96		1.96	C30163		1.63	C30163
		33.0	12.5	1.33		1.33	C30164		1.11	C30164
		48.0	18.5	0.90		0.90	C30165		0.75	C30165
	8.8	14.5	3.5	2.32	19.50	2.32	C30166	16.24	1.94	C30166
		21.5	5.5	1.48		1.48	C30167		1.23	C30167
		32.0	8.5	0.96		0.96	C30168		0.80	C30168
		47.0	12.5	0.65		0.65	C30169		0.54	C30169
		68.0	18.5	0.44		0.44	C30170		0.37	C30170
	10.8	20.0	3.5	1.20	15.39	1.20	C30171	12.82	1.00	C30171
		30.0	5.5	0.76		0.76	C30172		0.63	C30172
		45.0	8.5	0.49		0.49	C301573		0.41	C301573
		66.0	12.5	0.33		0.33	C30174		0.28	C30174
		96.5	18.5	0.23		0.23	C30175		0.19	C30175

Wire Diameter	Outside Diameter	Free Length	Apx. No of	Max Rec Deflection	Music Wire			Stainless Steel
d mm	OD mm	LO mm	wkg coils	LD mm	Max Rec Load N	Rate N/mm	Product Code	Max Rec Load N	Rate N/mm	Product Code
1.0	6.0	8.5	3.5	1.9	43.73	23.24	C30176	36.42	19.36	C40176
		12.0	5.5	3.0		14.81	C30177		12.34	C40177
		17.0	8.5	4.4		9.57	C30178		7.97	C40178
		24.0	12.5	6.6		6.51	C30179		5.42	C40179
		34.5	18.5	9.9		4.40	C30180		3.67	C40180
	7.3	10.0	3.5	2.7	34.12	11.57	C30181	28.42	9.64	C40181
		14.5	5.5	4.4		7.39	C30182		6.16	C40182
		21.5	8.5	7.2		4.79	C30183		3.99	C40183
		30.5	12.5	10.6		3.26	C30184		2.71	C40184
		43.5	18.5	15.2		2.20	C30185		1.83	C40185
	9.0	13.0	3.5	5.7	33.13	5.68	C30186	27.60	4.73	C40186
		19.0	5.5	8.9		3.61	C30187		3.01	C40187
		28.5	8.5	14.2		2.33	C30188		1.94	C40188
		40.5	12.5	20.6		1.59	C30189		1.32	C40189
		59.0	18.5	30.7		1.08	C30190		0.90	C40190
	11.0	17.5	3.5	9.5	27.35	2.90	C30191	22.77	2.42	C40191
		26.0	5.5	14.8		1.85	C30192		1.54	C40192
		39.0	8.5	23.0		1.20	C30193		1.00	C40193
		56.0	12.5	33.6		0.81	C30194		0.68	C40194
		81.5	18.5	49.5		0.55	C30195		0.46	C40195
	13.5	24.0	3.5	14.6	21.96	1.49	C30196	18.20	1.24	C40196
		36.5	5.5	23.1		0.95	C30197		0.79	C40197
		55.5	8.5	36.1		0.61	C30198		0.51	C40198
		80.5	12.5	53.		0.41	C30199		0.35	C40199
		115.0	18.5	75.6		0.28	C30200		0.24	C40200

Wire Diameter	Outside Diameter	Free Length	Apx. No of	Max Rec Deflection	Music Wire			Stainless Steel
d mm	OD mm	LO mm	wkg coils	LD mm	Max Rec Load N	Rate N/mm	Product Code	Max Rec Load N	Rate N/mm	Product Code
1.25	7.55	12.0	3.5	4.8	133.30	29.03	C30201	111.08	24.18	C40201
		17.0	5.5	7.2		18.04	C30202		15.03	C40202
		25.0	8.5	11.2		11.77	C30203		9.80	C40203
		35.5	12.5	16.3		8.09	C30204		6.74	C40204
		51.5	18.5	24.4		5.39	C30205		4.49	C40205
	9.25	15.0	3.5	7.6	104.91	14.32	C30206	87.40	11.93	C40206
		22.0	5.5	11.5		8.92	C30207		7.43	C40207
		33.0	8.5	18.1		5.83	C30208		4.86	C40208
		47.5	12.5	26.5		3.96	C30209		3.30	C40209
		69.0	18.5	39.0		2.69	C30210		2.24	C40210
	11.25	20.0	3.5	12.3	85.41	7.09	C30211	71.13	5.91	C40211
		29.5	5.5	18.7		4.51	C30212		3.76	C40212
		44.5	8.5	29.3		2.92	C30213		2.43	C40213
		64.0	12.5	42.9		1.99	C30214		1.66	C40214
		93.5	18.5	63.5		1.34	C30215		1.12	C40215
	13.75	27.0	3.5	18.8	69.03	3.63	C30216	57.50	3.02	C40216
		41.5	5.5	29.9		2.31	C30217		1.93	C40217
		62.5	8.5	46.0		1.49	C30218		1.24	C40218
		90.5	12.5	67.4		1.02	C30219		0.85	C40219
		130.0	18.5	97.1		0.69	C30220		0.57	C40220
	17.25	40.5	3.5	31.4	54.22	1.73	C30221	45.16	1.44	C40221
		62.0	5.5	49.1		1.10	C30222		0.91	C40222
		94.0	8.5	75.5		0.72	C30223		0.60	C40223
		140.0	12.5	114.0		0.48	C30224		0.40	C40224
		205.0	18.5	167.7		0.32	C30225		0.27	C40225

Wire Diameter	Outside Diameter	Free Length	Apx. No of	Max Rec Deflection	Music Wire			Stainless Steel
d mm	OD mm	LO mm	wkg coils	LD mm	Max Rec Load N	Rate N/mm	Product Code	Max Rec Load N	Rate N/mm	Product Code
1.6	9.6	14.5	3.5	5.5	211.70	37.27	C30226	174.90	31.04	C40226
		21.5	5.5	8.9		23.73	C30227		19.77	C40227
		31.5	8.5	13.6		15.40	C30228		12.83	C40228
		45.0	12.5	20.2		10.40	C30229		8.66	C40229
		65.5	18.5	30.3		7.05	C30230		5.87	C40230
	11.6	18.5	3.5	9.1	168.90	18.56	C30231	141.30	15.93	C40231
		27.0	5.5	14.8		11.81	C30232		10.13	C40232
		40.5	8.5	21.1		7.64	C30233		6.56	C40233
		58.5	12.5	32.5		5.20	C30234		4.44	C40234
		85.0	18.5	48.1		3.51	C30235		3.01	C40235
	14.10	24.0	3.5	14.0	135.20	9.76	C30236	112.71	8.13	C40236
		36.0	5.5	21.9		6.23	C30237		5.19	C40237
		53.5	8.5	33.4		4.04	C30238		3.37	C40238
		78.0	12.5	50.0		2.73	C30239		2.27	C40239
		115.0	18.5	75.1		1.84	C30240		1.54	C40240
	17.6	34.0	3.5	23.0	105.80	4.65	C30241	88.21	3.87	C40241
		51.5	5.5	36.0		2.96	C30242		2.47	C40242
		77.5	8.5	55.3		1.92	C30243		1.60	C40243
		110.0	12.5	78.8		1.30	C30244		1.09	C40244
		165.0	18.5	120.4		0.88	C30245		0.74	C40245
	21.6	48.0	3.5	35.6	84.81	2.38	C30246	70.65	1.99	C40246
		73.5	5.5	55.9		1.52	C30247		1.27	C40247
		110.0	8.5	84.5		0.99	C30248		0.83	C40248
		165.0	12.5	129.0		0.67	C30249		0.56	C40249
		240.0	18.5	188.2		0.45	C30250		0.38	C40250

Wire Diameter	Outside Diameter	Free Length	Apx. No of	Max Rec Deflection	Music Wire			Stainless Steel
d mm	OD mm	LO mm	wkg coils	LD mm	Max Rec Load N	Rate N/mm	Product Code	Max Rec Load N	Rate N/mm	Product Code
2.0	12.0	18.0	3.5	6.8	317.76	46.58	C30251	274.50	38.80	C40251
		26.5	5.5	10.9		29.71	C30252		24.75	C40252
		38.5	8.5	16.5		19.22	C30253		16.01	C40253
		55.0	12.5	24.4		13.04	C30254		10.86	C40254
		79.5	18.5	36.1		8.81	C30255		7.34	C40255
	14.5	22.5	3.5	10.8	253.80	23.93	C30256	211.50	19.93	C40256
		33.0	5.5	16.6		15.20	C30257		12.66	C40257
		49.5	8.5	26.0		9.81	C30258		8.17	C40258
		71.0	12.5	38.0		6.69	C30259		5.57	C40259
		105.0	18.5	57.8		4.52	C30260		3.77	C40258
	18.0	30.0	3.5	17.5	197.80	11.38	C30261	165.00	9.48	C40261
		45.0	5.5	27.3		7.24	C30262		6.03	C40262
		68.0	8.5	42.5		4.69	C30263		3.90	C40263
		98.0	12.5	62.1		3.19	C30264		2.65	C40264
		145.0	18.5	93.6		2.16	C30265		1.80	C40265
	22.0	41.0	3.5	27.4	158.7	5.83	C30266	132.20	4.85	C40266
		62.0	5.5	42.4		3.71	C30267		3.09	C40267
		94.0	8.5	66.4		2.39	C30268		1.99	C40268
		135.0	12.5	96.2		1.63	C30269		1.36	C40269
		200.0	18.5	144.4		1.10	C30270		0.91	C40270
	27.0	58.0	3.5	43.0	127.30	2.98	C30271	106.20	2.48	C40271
		88.5	5.5	67.1		1.90	C30272		1.58	C40272
		135.0	8.5	104.0		1.23	C30275		1.02	C40275
		195.0	12.5	151.2		0.83	C30274		0.69	C40274
		290.0	18.5	227.0		0.57	C30275		0.47	C40275

Wire Diameter	Outside Diameter	Free Length	Apx. No of	Max Rec Deflection	5Music Wire			Stainless Steel
d mm	OD mm	LO mm	wkg coils	LD mm	Max Rec Load N	Rate N/mm	Product Code	Max Rec Load N	Rate N/mm	Product Code
2.2	11.0	16.2	3.5	3.3	337.30	100.03	C30276	280.80	83.32	C40276
		23.0	5.5	5.3		63.55	C30277		52.93	C40277
		36.5	9.5	9.1		36.87	C30278		30.72	C40278
		56.8	15.5	14.9		22.56	C30279		18.79	C40279
	15.0	20.0	3.5	7.1	256.80	32.46	C30280	213.80	27.04	C40280
		30.2	5.5	12.5		20.69	C30281		17.24	C40281
		48.9	9.5	21.5		11.96	C30282		9.97	C40282
	24.0	39.2	3.5	25.2	165.70	6.57	C30283	137.80	5.47	C40283
	24.0	59.1	5.5	39.6	165.70	4.19	C30284	137.80	3.49	C40284
2.5	15.0	22.0	3.5	8.0	467.60	58.35	C30285	389.50	48.61	C40285
		32.0	5.5	12.5		37.17	C30286		30.96	C40286
		47.5	8.5	19.7		24.03	C30287		20.01	C40287
		67.5	12.5	28.8		16.28	C30288		13.56	C40288
		98.0	18.5	42.9		10.98	C30289		9.15	C40289
	18.5	27.5	3.5	12.9	364.70	27.75	C30290	303.70	23.12	C40290
		41.0	5.5	20.5		17.65	C30291		14.70	C40291
		61.0	8.5	31.7		11.47	C30292		9.56	C40292
		88.0	12.5	46.9		7.78	C30293		6.48	C40293
		130.0	18.5	71.1		5.25	C30294		4.37	C40294
	22.5	36.0	3.5	20.5	292.10	14.22	C30295	243.30	11.84	C40295
		54.0	5.5	32.1		9.05	C30296		7.54	C40296
		81.5	8.5	50.0		5.85	C30297		4.88	C40297
		120.0	12.5	75.7		3.98	C30298		3.32	C40298
		175.0	18.5	11.4		2.69	C30299		2.24	C40299

Wire Diameter	Outside Diameter	Free Length	Apx. No of	Max Rec Deflection	Music Wire			Stainless Steel
d mm	OD mm	LO mm	wkg coils	LD mm	Max Rec Load N	Rate N/mm	Product Code	Max Rec Load N	Rate N/mm	Product Code
2.25	27.5	49.0	3.5	32.2	233.30	7.29	C30300	194.30	6.07	C40300
		74.5	5.5	50.5		4.64	C30301		3.86	C40301
		115.0	8.5	80.2		3.00	C30302		2.50	C40302
		165.0	12.5	115.8		2.04	C30303		1.70	C40303
		240.0	18.5	169.2		1.38	C30304		1.15	C40304
	34.5	71.5	3.5	52.2	182.30	3.48	C30305	151.80	2.90	C40305
		110.0	5.5	82.1		2.22	C30306		1.85	C40306
		170.0	8.5	129.0		1.43	C30307		1.19	C40307
		245.0	12.5	186.9		0.97	C30308		0.81	C40308
		360.0	18.5	276.1		0.66	C30309		0.55	C40309
2.8	14.0	20.5	3.5	4.1	518.60	127.49	C30310	432.00	106.20	C40310
		29.0	5.5	6.7		62.86	C30311		52.36	C40311
		45.9	9.5	11.0		46.88	C30312		39.05	C40312
		71.5	15.5	18.1		28.73	C30313		23.93	C40313
	20.0	27.2	3.5	10.8	379.40	35.11	C30314	316.00	29.24	C40314
		39.5	5.5	17.0		22.36	C30315		18.63	C40315
		64.2	9.5	29.3		12.94	C30316		10.78	C40316
	30.0	47.0	3.5	29.1	258.80	8.88	C30317	215.50	7.40	C40317
	30.0	70.7	5.5	45.8	258.80	5.65	C30318	215.50	4.71	C40318

Wire Diameter	Outside Diameter	Free Length	Apx. No of	Max Rec Deflection	Music Wire			Stainless Steel
d mm	OD mm	LO mm	wkg coils	LD mm	Max Rec Load N	Rate N/mm	Product Code	Max Rec Load N	Rate N/mm	Product Code
3.2	19.2	27.5	3.5	9.7	720.60	74.33	C30319	600.10	61.92	C40319
		40.0	5.5	15.1		47.37	C30320		39.46	C40320
		59.0	8.5	23.6		30.69	C30321		22.57	C40321
		83.5	12.5	34.5		20.79	C30322		17.32	C40322
		120.0	18.5	50.6		14.12	C30323		11.76	C40323
	23.2	33.5	3.5	15.0	576.50	38.15	C30324	480.20	31.78	C40324
		49.5	5.5	23.6		24.22	C30325		20.18	C40325
		74.0	8.5	36.9		15.69	C30326		13.07	C40326
		105.0	12.5	53.4		10.69	C30327		8.90	C40327
		155.0	18.5	81.8		7.21	C30328		6.00	C40328
	28.2	42.5	3.5	23.4	461.00	19.42	C30329	383.70	16.17	C40329
		63.5	5.5	37.2		12.36	C30330		10.29	C40330
		94.5	8.5	57.4		8.02	C30331		6.68	C40331
		135.0	12.5	83.4		5.45	C30332		4.54	C40332
		200.0	18.5	126.8		3.68	C30333		3.06	C40333
	35.2	58.5	3.5	38.7	359.80	9.31	C30334	300.50	7.75	C40334
		88.5	5.5	61.1		5.92	C30335		4.93	C40335
		135.0	8.5	86.2		3.82	C30336		3.19	C40336
		190.0	12.5	135.9		2.61	C30337		2.17	C40337
		280.0	18.5	203.0		1.76	C30338		1.46	C40338
	43.2	82.0	3.5	60.8	288.20	4.76	C30339	240.00	3.96	C40339
		125.0	5.5	95.3		3.03	C30340		2.52	C40340
		190.0	8.5	147.7		1.96	C30341		1.63	C40341
		275.0	12.5	215.8		1.33	C30342		1.11	C40342
		405.0	18.5	320.5		0.90	C30343		0.75	C40343

Wire Diameter	Outside Diameter	Free Length	Apx. No of	Max Rec Deflection	Music Wire			Stainless Steel
d mm	OD mm	LO mm	wkg coils	LD mm	Max Rec Load N	Rate N/mm	Product Code	Max Rec Load N	Rate N/mm	Product Code
4.0	24.0	33.5	3.5	11.3	1068.7	93.07	C30344	890.30	77.52	C40344
		49.0	5.5	18.0		59.23	C30345		49.34	C40345
		72.0	8.5	27.8		38.34	C30346		31.94	C40346
		105.0	12.5	43.3		26.09	C30347		21.73	C40347
		150.0	18.5	62.3		17.55	C30348		14.62	C40348
	29.0	41.0	3.5	18.1	852.10	47.66	C30349	708.50	39.70	C40349
		60.5	5.5	28.3		30.30	C30350		25.24	C40350
		89.5	8.5	43.5		19.61	C30351		16.34	C40351
		130.0	12.5	65.5		13.34	C30352		11.11	C40352
		185.0	18.5	92.9		9.02	C30353		7.52	C40353
	36.0	53.5	3.5	29.5	665.50	22.75	C30354	554.50	18.95	C40354
		79.5	5.5	46.2		14.42	C30355		12.01	C40355
		120.0	8.5	72.8		9.35	C30356		7.78	C40356
		170.0	12.5	104.2		6.35	C30357		5.29	C40357
		250.0	18.5	156.4		4.30	C30358		3.58	C40358
	44.0	71.0	3.5	45.8	532.00	11.67	C30359	443.50	9.72	C40359
		105.0	5.5	69.9		7.40	C30360		6.17	C40360
		160.0	8.5	110.0		4.79	C30361		3.99	C40361
		235.0	12.5	165.2		3.26	C30362		2.71	C40362
		340.0	18.5	240.2		2.20	C30363		1.83	C40363
	54.0	99.0	3.5	71.6	426.40	5.95	C30364	355.20	4.96	C40364
		150.0	5.5	111.4		3.79	C30365		3.15	C40365
		230.0	8.5	174.6		2.45	C30366		2.04	C40366
		335.0	12.5	257.2		1.67	C30367		1.39	C40367
		490.0	18.5	379.0		1.13	C30368		0.94	C40368

Wire Diameter	Outside Diameter	Free Length	Apx. No of	Max Rec Deflection	Music Wire			Stainless Steel
d mm	OD mm	LO mm	wkg coils	LD mm	Max Rec Load N	Rate N/mm	Product Code	Max Rec Load N	Rate N/mm	Product Code
5.0	30.0	41.0	3.5	13.4	1568.00	116.70	C30368	1306.00	97.21	C40368
		60.0	5.5	21.5		74.04	C30368		61.68	C40368
		87.5	8.5	32.6		47.86	C30368		39.87	C40368
		125.0	12.5	48.3		32.59	C30368		27.15	C40368
		180.0	18.5	71.0		21.97	C30368		18.30	C40368
	37.0	51.0	3.5	22.3	1224.00	55.41	C30368	1020.00	46.16	C40368
		75.0	5.5	34.8		35.30	C30368		29.40	C40368
		110.0	8.5	52.5		22.85	C30368		19.03	C40368
		160.0	12.5	79.5		15.49	C30368		12.90	C40368
		230.0	18.5	115.0		10.49	C30368		8.74	C40368
	45.0	64.0	3.5	34.4	979.80	28.34	C30368	815.80	23.61	C40368
		95.5	5.5	54.4		18.04	C30368		15.03	C40368
		140.0	8.5	81.6		11.67	C30368		9.72	C40368
		205.0	12.5	123.6		7.94	C30368		6.61	C40368
		300.0	18.5	184.0		5.36	C30368		4.46	C40368
	55.0	85.0	3.5	54.1	783.50	14.51	C30368	653.40	12.09	C40368
		130.0	5.5	86.8		9.25	C30368		7.71	C40368
		195.0	8.5	133.4		5.98	C30368		4.98	C40368
		280.0	12.5	193.9		4.07	C30368		3.39	C40368
		410.0	18.5	287.0		2.75	C30368		2.29	C40368
	68.0	120.0	3.5	87.7	622.50	7.27	C30368	518.50	6.06	C40368
		180.0	5.5	134.7		4.63	C30368		3.86	C40368
		275.0	8.5	210.6		2.99	C30368		2.49	C40368
		395.0	12.5	304.2		2.03	C30368		1.69	C40368
		585.0	18.5	455.0		1.37	C30368		1.14	C40368

Metric Compression Springs

HOLE DIA HD mm	SHAFT DIA SD mm	FREE LENGTH LO mm	CALCULATED RATE NEWTONS/mm	MAX RECOMMENDED DEFLECTION LD mm	MAX RECOMMENDED LOAD NEWTONS	TOTAL DEFLECTION TO SOLID MM	PRODUCT CODE
10	4.7	25	4.5	8.8	39.2	10.9	DL10X25
			12.3	8.3	102.0	11	DM10X25
			21.3	7.3	155.0	9.9	DH10X25
			34.3	5.9	204.0	6.9	DU10X25
		32	3.5	11.8	41.2	14.9	DL10X32
			9.6	11.3	108.0	14.9	DM10X32
			16.5	9.7	160.0	12.9	DH10X32
			25.5	7.3	188.4	7.9	DU10X32
		38	2.8	13.6	38.3	16.9	DL10X38
			7.9	13.3	105.9	17.7	DM10X38
			13.3	11.3	151.1	14.4	DH10X38
			21.6	9.2	199.1	11.5	DU10X38
		44	2.5	15.9	38.3	19.9	DL10X44
			6.7	15.3	102.0	20.3	DM10X44
			11.4	13.2	151.1	17.4	DH10X44
			17.9	10.0	179.5	13.9	DU10X44
		51	2.1	18.1	37.3	27.4	DL10X51
			6.0	18.6	110.9	24.7	DM10X51
			9.8	15.4	151.1	20.4	DH10X51
			15.1	11.6	174.6	14.9	DU10X51
		64	1.7	23.5	38.3	19.9	DL10X64
			4.7	23.6	110.9	30.4	DM10X64
			7.7	19.7	153.0	25.9	DH10X64
			12.3	15.3	187.4	21.2	DU10X64
		76	1.4	27.4	37.3	34.4	DL10X76
			3.9	28.0	109.9	36.9	DM10X76
			6.5	23.5	152.1	30.9	DH10X76
			10.2	18.0	183.4	24.5	DU10X76
		305	0.4	129.3	50.0	169.8	DL10X05
			0.9	105.8	93.2	131.6	DM10X05
			1.6	96.4	151.1	126.4	DH10X05
			2.5	71.8	175.6	103.8	DU10X05

12.5	6.3	25	9.1	9.5	86.3	12.6	DL13X25
			22.8	8.4	191.3	10.4	DM13X25
			39.2	7.0	277.7	8.9	DH13X25
			59.8	6.0	360.0	8.5	DU13X25
		32	6.7	12.1	80.4	16.1	DL13X32
			17.7	11.3	200.1	13.9	DM13X32
			30.4	9.6	293.3	12.9	DH13X32
			45.1	7.7	352.2	11.1	DU13X32
		38	5.6	14.8	82.4	19.6	DL13X38
			14.4	13.5	194.2	17.9	DM13X38
			24.2	11.1	269.8	14.9	DH13X38
			36.3	9.0	326.7	12.8	DU13X38
		44	4.5	16.5	74.6	21.8	DL13X44
			11.8	15.1	177.6	19.9	DM13X44
			20.1	12.5	251.1	15.9	DH13X44
			30.4	10.2	310.0	14.6	DU13X44
		51	3.8	19.1	72.6	25.4	DL13X51
			10.3	18.1	186.4	24.1	DM13X51
			17.7	15.2	267.8	19.9	DH13X51
			27.4	13.2	363.0	18.9	DU13X51
		64	2.9	23.7	69.7	31.6	DL13X64
			8.0	22.7	182.4	30.1	DM13X64
			13.8	19.3	266.8	25.9	DH13X64
			22.1	17.4	984.6	24.9	DU13X64
		76	2.6	30.2	79.5	40.2	DL13X76
			6.9	27.7	190.3	36.4	DM13X76
			11.2	22.4	253.1	28.9	DH13X76
			18.2	21.0	382.6	30.0	DU13X76
		305	0.6	115.5	67.7	153.8	DL13X305
			1.6	108.1	168.7	143.8	DM13X305
			2.6	89.5	236.4	120.8	DH13X305
			4.2	80.7	340	103.7	DU13X305

16	8.0	25	17.7	9.3	163.8	10.9	DL16X25
			32.4	8.2	265.9	9.1	DM16X25
			87.3	7.1	626.9	8.9	DH16X25
			124.6	5.3	662.2	6.9	DU16X25
		32	13.3	12.1	161.9	15.5	DL16X32
			24.1	10.5	254.1	12.8	DM16X32
			63.8	9.3	597.4	12.5	DH16X32
			93.2	7.1	668.1	8.4	DU16X32
		38	10.5	14.1	148.1	17.9	DL16X38
			21.1	13.4	284.5	17.7	DM16X38
			52.0	11.2	585.7	14.6	DH16X38
			76.5	8.7	667.1	11.5	DU16X38
		44	8.8	16.3	143.2	21.6	DL16X44
			16.4	14.5	237.4	20.2	DM16X44
			42.2	12.5	526.8	16.4	DH16X44
			64.7	10.2	666.1	13.3	DU16X44
		51	7.7	19.5	151.1	25.3	DL16X51
			13.7	16.6	228.6	21.7	DM16X51
			36.3	14.9	541.5	20.3	DH16X51
			55.0	11.9	674.9	13.8	DU16X51
		64	5.8	23.7	137.3	31	DL16X64
			10.8	21.2	228.6	27.1	DM16X64
			28.4	19.1	545.4	23.3	DH16X64
			43.1	15.3	662.2	19.3	DU16X64
		76	4.7	27.8	130.5	36.8	DL16X76
			9.1	25.7	234.5	33.5	DM16X76
			23.1	22.3	516.0	29.3	DH16X76
			36.3	18.6	677.9	25.4	DU16X76
		89	4.2	34.4	145.2	45.7	DL16X89
			7.7	30.5	236.4	38.8	DM16X89
			19.8	26.8	530.7	33.4	DH16X89
			30.4	21.7	659.2	29.4	DU16X89
		102	3.5	38.2	134.4	50.8	DL16X102
			6.9	35.9	246.2	46.5	DM16X102
			17.3	30.8	532.7	41.5	DH16X102
			27.0	25.7	693.6	36.3	DU16X102
		305	1.1	108.8	116.7	144.6	DL16X305
			2.3	110.5	249.2	144.8	DM16X305
			5.4	91.0	490.5	115.8	DH16X305
			8.7	78.5	684.7	105.2	DU16X305

20	10	25	51.0	8.7	444.4	10.5	DL20X25
			87.3	7.5	654.3	7.9	DM20X25
			226.6	5.7	1309.6	6.9	DH20X25
			347.3	5.3	1861.0	6.9	DU20X25
		32	38.3	11.2	429.7	15.0	DL20X32
			68.7	10.5	721.0	14.0	DM20X32
			174.6	7.2	1272.4	9.7	DH20X32
			250.2	7.2	1810.9	10.1	DU20X32
		38	30.4	13.1	400.2	16.4	DL20X38
			54.9	12.5	689.6	15.3	DM20X38
			139.3	8.8	1238.0	12	DH20X38
			198.2	8.1	1610.8	11.4	DU20X38
		44	26.7	15.5	615.0	19.4	DL20X44
			46.1	14.2	656.3	15.8	DM20X44
			115.8	9.9	11515.7	13.5	DH20X44
			166.8	10.1	1687.3	13.4	DU20X44
		51	23.7	18.8	447.3	24.3	DL20X51
			38.3	16.3	623.9	19.8	DM20X51
			100.1	12.2	1229.2	16.7	DH20X51
			142.2	11.7	1666.7	16.6	DU20X51
		64	18.4	23.7	438.5	29.7	DL20X64
			30.4	21.1	643.5	26.4	DM20X64
			78.5	16.2	1274.3	22.1	DH20X64
			11.8	15.3	1710.9	21.6	DU20X64
		76	15.6	28.9	450.3	36.3	DL20X76
			22.5	25.6	654.3	33.4	DM20X76
			63.8	18.9	1205.6	25.7	DH20X76
			93.2	18.7	1747.2	26.2	DU20X76
		89	13.3	34.4	459.1	42.7	DL20X89
			22.0	30.5	671.0	38.1	DM20X89
			54.0	22.3	1202.7	30.4	DH20X89
			78.5	22.3	1752.1	30.3	DU20X89
		102	11.8	40.1	472.8	53	DL20X102
			19.3	35.8	691.6	44.4	DM20X102
			47.1	26.2	1236.1	35.6	DH20X102
			67.6	25.9	1754.0	35.1	DU20X102
		115	10.4	45.4	471.9	59.1	DL20X115
			17.0	40.3	683.8	49.8	DM20X115
			42.2	30.4	1285.1	41.5	DH20X115
			58.9	28.1	1654.9	39.2	DU20X115
		127	9.4	50.8	478.7	66.8	DL20X127
			15.4	44.6	686.7	55.1	DM20X127
			37.3	33.1	1235.1	45.3	DH20X127
			53.0	31.0	1642.2	44.1	DU20X127
		152	7.8	60.5	475.8	80	DL20X152
			12.8	53.6	683.8	61.4	DM20X152
			30.9	39.4	1219.4	53.8	DH20X152
			43.2	36.3	1570.6	51.8	DU20X152
		305	3.8	121.5	465.0	159.8	DL20X305
			6.3	109.6	687.7	138.7	DM20X305
			15.1	80.8	1220.4	110.7	DH20X305
			21.1	74.5	1572.5	106.2	DU20X305

25	12.5	25	98.1	8.6	845.6	10.9	DL25X25
		25	161.9	7.9	1286.1	9.3	DM25X25
		32	73.6	11.3	833.8	14.6	DL25X32
			122.6	10.0	1236.1	11.9	DM25X32
			280.6	7.5	2106.2	10.2	DH25X32
			381.6	7.2	2770.3	9.6	DU25X32
		38	61.8	14.1	874.1	17.8	DL25X38
			96.1	11.7	1124.2	14.5	DM25X38
			225.6	9.3	2100.3	12.5	DH25X38
			301.2	8.8	2677.1	12.3	DU25X38
		44	49.0	15.6	769.1	20.8	DL25X44
			80.4	13.5	1089.9	17.1	DM25X44
			189.3	11.1	2103.3	14.9	DH25X44
			247.2	10.1	2515.3	14.4	DU25X44
		51	44.1	19.2	849.5	24.8	DL25X51
			70.6	16.4	1158.6	20.8	DM25X51
			158.9	12.9	2062.1	17.6	DH25X51
			207.0	11.8	2456.4	15.7	DU25X51
		64	35.3	24.7	875.1	32.7	DL25X64
			54.9	21.1	1159.5	28	DM25X64
			125.6	16.9	2130.7	23.1	DH25X64
			160.9	15.4	2491.7	21.2	DU25X64
		76	28.9	29.5	855.4	38.8	DL25X76
			44.1	24.1	1064.4	31.3	DM25X76
			101.0	19.9	2012.0	27.1	DH25X76
			131.5	18.1	2378.9	24.7	DU25X76
		89	24.5	35.0	860.3	46.7	DL25X89
			37.3	28.5	1065.4	36.7	DM25X89
			86.3	24.5	2119.9	33.5	DH25X89
			110.9	22.0	2443.7	30.4	DU25X89
		102	21.1	40.2	847.6	52.8	DL25X102
			33.4	34.2	1141.9	42.8	DM25X102
			74.6	27.9	2080.7	38.1	DH25X102
			96.1	25.6	2467.2	35.8	DU25X102
		115	18.2	44.6	214.2	58.7	DL25X115
			28.9	38.2	1106.6	47.8	DM25X115
			66.7	32.2	2148.4	43.8	DH25X115
			85.3	29.3	2500.6	38.7	DU25X115
		127	17.2	51.1	877.0	68	DL25X127
			26.3	42.4	115.4	50.8	DM25X127
			59.8	36.1	2162.1	49.3	DH25X127
			76.5	32.5	2489.8	44.6	DU25X127
		152	14.4	62.2	897.6	81.7	DL25X152
			22.0	51.6	1133.1	66.8	DM25X152
			49.0	42.4	2080.7	50.8	DH25X152
			62.8	38.4	2413.3	50.4	DU25X152
		178	12.3	73.3	898.6	94.3	DL25X178
			18.4	59.8	1102.6	71.7	DM25X178
			42.2	50.7	2139.6	68.9	DH25X178
			54.0	46.6	2517.2	63.1	DU25X178
		203	10.9	84.5	919.2	112.5	DL25X203
			16.5	70.4	1159.5	90.8	DM25X203
			36.3	57.0	2069.9	78	DH25X203
			47.1	53.5	2521.2	74.8	DU25X203
		305	7.3	128.7	933.9	170.8	DL25X305
			11.1	108.7	1204.7	141.7	DM25X305
			24.5	90.1	2209.2	123.2	DH25X305
			30.4	78.2	2379.9	107.9	DU25X305

32	16	38	91.2	12.9	1176.2	16.8	DL32X38
			159.9	11.7	1870.8	12.8	DM32X38
			384.6	10.1	3906.3	12.9	DH32X38
			519.9	7.9	4117.3	10.3	DU32X38
		44	79.5	15.7	1253.7	20.7	DL32X44
			133.4	13.5	1801.1	14.6	DM32X44
			317.8	11.4	3629.7	13.8	DH32X44
			427.7	9.2	3969.1	11.2	DU32X44
		51	66.7	18.3	1224.3	24.3	DL32X51
			111.8	15.7	1760.9	19.1	DM32X51
			271.7	13.4	3643.4	17.4	DH32X51
			361.0	11.3	4093.7	14.8	DU32X51
		64	53.0	24.0	1274.3	32	DL32X64
			86.3	19.5	1683.4	22.8	DM32X64
			211.9	17.4	3692.5	21.8	DH32X64
			282.5	15.5	4395.9	21.7	DU32X64
		76	44.1	29.0	1281.2	37.2	DL32X76
			70.6	23.7	1673.6	28.9	DM32X76
			172.7	20.7	3576.7	27.9	DH32X76
			225.6	17.8	4031.9	23.5	DU32X76
		89	37.3	34.2	1275.3	45.5	DL32X89
			61.8	29.2	1807.0	36.5	DM32X89
			145.2	23.9	3478.6	30.6	DH32X89
			189.3	21.2	4029.9	26.8	DU32X89
		102	31.4	38.6	1211.5	51.3	DL32X102
			51.0	31.5	1606.9	36.8	DM32X102
			125.6	27.9	3513.0	36.6	DH32X102
			160.9	24.7	3975.0	33.7	DU32X102
		115	28.1	44.5	1249.8	59.3	DL32X115
			46.1	36.7	1694.2	46.4	DM32X115
			109.9	32.0	3516.9	41.8	DH32X115
			142.2	28.1	3999.5	35.9	DU32X115
		127	25.5	49.5	1263.5	65.8	DL32X127
			42.2	40.9	1726.6	49.5	DM32X127
			99.1	36.0	3574.8	49.1	DH32X127
			128.5	31.2	4014.3	38.8	DU32X127
		152	21.1	59.7	1258.6	79.5	DL32X152
			35.3	50.1	1768.7	61.7	DM32X152
			81.4	42.6	3468.8	56.4	DH32X152
			105.0	37.3	3923.0	46.8	DU32X152
		178	17.6	68.9	1210.6	91.7	DL32X178
			29.4	57.6	1695.2	66.2	DM32X178
			68.7	49.8	3424.7	67.7	DH32X178
			89.3	45.4	4055.5	60.5	DU32X178
		203	15.4	79.4	1222.3	105.6	DL32X203
			25.4	65.2	1656.9	75.2	DM32X203
			60.8	58.3	3549.3	79.7	DH32X203
			78.4	51.9	4077.0	69.9	DU32X203
		254	12.3	100.4	1231.2	133.9	DL32X203
			20.2	81.9	1654.9	100.4	DM32X254
			48.1	74.1	3562.0	100.8	DH32X254
			61.8	64.5	3986.8	82.8	DU32X254
		305	10.2	120.6	1231.2	160.9	DL32X305
			17.1	102.7	1753.0	126.8	DM32X305
			39.2	86.3	3388.4	116.8	DH32X305
			51.0	77.8	3973.0	103.7	DU32X305

40	20	51	98.1	17.7	1738.3	23.5	DL40X51
			161.9	16.6	2694.8	20.8	DM40X51
			347.3	13.6	4729.4	18.4	DH40X51
			578.8	11.0	6418.7	12.9	DU40X51
		64	77.5	23.5	1825.6	31.3	DL40X64
			122.6	21.0	2575.1	24.8	DM40X64
			267.8	17.7	4758.8	23.8	DH40X64
			450.3	15.5	7015.1	19.3	DU40X64
		76	62.8	27.3	1716.7	35.8	DL40X76
			102.0	25.3	2583.0	31.6	DM40X76
			220.7	21.6	4767.7	27.4	DH40X76
			357.1	17.8	6366.7	22.2	DU40X76
		89	54.9	33.5	1840.4	44.4	DL40X89
			84.4	29.6	2502.5	37.9	DM40X89
			187.4	26.2	4912.8	32.8	DH40X89
			892.3	21.2	6223.5	29.4	DU40X89
		102	47.1	39.0	1837.4	51.8	DL40X102
			73.6	35.1	2582.0	51.7	DM40X102
			163.8	31.2	5120.8	38.8	DH40X102
			258.0	25.7	6651.2	33.1	DU40X102
		115	42.2	44.5	1877.6	59.2	DL40X115
			64.7	39.4	2553.5	49.7	DM40X115
			142.2	34.9	4972.7	42.7	DH40X115
			227.6	29.2	6652.2	41.3	DU40X115
		127	38.3	49.6	1898.2	65.7	DL40X127
			57.9	43.4	2512.3	55.5	DM40X27
			128.5	39.2	5046.3	48.8	DH40X127
			201.1	32.5	6537.4	45.2	DU40X127
		152	30.4	57.9	1761.9	76.4	DL40X152
			47.1	51.7	2434.8	67.8	DM40X152
			105.9	47.7	5055.1	60.8	DH40X152
			164.8	39.2	6468.7	54.7	DU40X152
		178	25.5	67.6	1725.6	90.0	DL40X178
			42.2	64.3	2715.4	83.8	DM40X178
			89.3	56.4	5039.4	75.8	DH40X178
			140.3	46.6	6549.2	61.3	DU40X178
		203	22.9	79.5	1818.8	106	DL40X203
			37.3	74.8	2790.0	97.7	DM40X203
			77.5	64.0	4960.9	84.8	DH40X203
			120.7	52.9	6383.4	73.3	DU40X203
		254	18.4	101.5	1871.7	135	DL40X254
			28.9	92.2	2668.3	118.2	DM40X254
			61.8	81.6	5046.3	109.6	DH40X254
			94.2	65.5	6171.5	85.4	DU40X254
		305	14.9	119.5	1782.5	159	DL40X305
			23.7	109.9	2609.5	139.5	DM40X305
			51.0	97.9	4996.2	130.6	DH40X305
			78.5	80.2	6295.1	105.2	DU40X305

50	25	64	149.1	23.1	3451.2	28.9	DL50X64
			202.1	21.0	4243.8	24.8	DM50X64
			412.0	17.7	7292.8	21.8	DH50X64
			737.7	14.5	10718.4	16.7	DU50X64
		76	120.7	27.9	3369.7	34.8	DL50X76
			162.8	24.6	4005.4	31.5	DM50X76
			332.6	21.5	7159.3	26.8	DH50X76
			588.6	17.1	10082.7	18.9	DU50X76
		89	100.1	33.0	3306.9	40.7	DL50X89
			135.4	29.4	3979.9	35.9	DM50X89
			284.5	26.0	7422.2	32.8	DH50X89
			496.4	21.0	10463.3	25.3	DU50X89
		102	88.3	38.5	3407.0	48.6	DL50X102
			117.7	34.2	4026.0	43.4	DM50X102
			243.3	30.1	7325.1	35.4	DH50X102
			417.9	24.3	10187.1	33.7	DU50X102
		115	77.5	44.1	3419.8	57.9	DL50X115
			104.0	39.4	4101.6	46.8	DM50X115
			2129	34.1	7263.3	41.8	DH50X115
			368.9	28.3	10449.6	35.2	DU50X115
		127	68.7	48.4	3329.5	64.5	DL50X127
			93.2	43.5	4053.5	54.6	DM50X127
			189.3	37.9	7186.8	47.4	DH50X127
			324.7	30.9	10046.4	38.7	DU50X127
		152	55.9	57.9	3241.2	77.1	DL50X152
			77.5	53.2	4126.1	69.3	DM50X152
			153.1	45.2	6925.9	56.4	DH50X152
			263.9	37.4	9892.4	46.6	DU50X152
		178	49.0	70.3	3449.2	92.6	DL50X178
			66.7	64.2	4282.1	83.8	DM50X178
			131.6	53.8	7075.9	67.8	DH50X178
			226.6	46.0	10430.0	61.3	DU50X178
		203	40.2	76.8	3090.0	101.8	DL50X203
			55.9	70.8	3958.3	91.4	DM50X203
			114.8	63.3	7267.2	78.8	DH50X203
			197.2	53.2	10488.9	67.4	DU50X203
		254	33.4	100.7	3360.9	134.3	DL50X254
			46.1	92.8	4280.1	122.8	DM50X254
			89.3	78.6	7021.0	97.8	DH50X254
			156.0	68.3	10655.6	89.7	DU50X254
		305	27.3	120.5	3285.4	160.6	DL50X305
			37.3	109.9	4098.6	146.6	DM50X305
			72.6	91.2	6623.7	116.8	DH50X305
			126.5	80.1	10147.5	104.2	DU50X305

63	38	76	189.3	189.3	5230.7	35.8	DL63X76
		76	312.0	312.0	7926.5	33.4	DM63X76
		89	59.8	59.8	5254.2	43.8	DL63X89
		89	260.0	260.0	8062.3	39.7	DM63X89
		102	131.5	131.5	5038.4	51	DL63X102
		102	220.7	220.7	7983.4	44.8	DM63X102
		115	115.8	115.8	5020.8	57.1	DL63X115
		115	187.4	187.4	7470.3	51.4	DM63X115
		127	103.0	103.0	4971.7	64	DL63X127
		127	167.8	167.8	7521.3	56.8	DM63X127
		152	84.4	84.4	4910.9	77.5	DL63X152
		152	134.4	136.4	7387.9	68.9	DM63X152
		178	71.6	71.6	4975.6	92.4	DL63X178
		178	113.8	113.8	7313.4	82.8	DM63X178
		203	61.8	61.8	4908.9	105.9	DL63X203
		203	100.1	100.1	7499.7	96.4	DM63X203
		254	47.1	47.1	4600.9	129.8	DL63X254
		254	78.5	78.5	7407.5	109.7	DM63X254
		305	38.3	38.3	4482.2	155.9	DL63X305
		305	64.7	64.7	7412.4	145.2	DM63X305

COMPRESSION SPRINGS CAN BE MADE SPECIFICALLY TO YOUR DESIGN. PLEASE CONTACT OUR SPECIAL COMPONENTS DIVISION FOR FURTHER DETAILS.